IBM RS/6000 H50 Installation And Service Manual Download Page 202

Page: 202 / 327

6. Attach the rear of the CPU Drawer to the rack rails with the two (2) M4 screws

and the two (2) M4 washers provided with the CPU Drawer. This secures the
drawer to the rack.

7. Using four (4) M5 x 14 hex head screws supplied with this unit, attach the disk

drive drawer to the two nut clips and the rails in the front of the rack at the sides.

8. Replace the parts that you removed earlier:

Rear top cover

Front top cover

Both blowers

ALL Hot-Swappable disk drives

Front DASD cover

Both power supplies

7-8

RS/6000 Enterprise Server Model H50 Installation and Service Guide

Summary of Contents for RS/6000 H50








































































































































































































































































































































Search results

Summary of Contents for RS/6000 H50

Reviews:

Related manuals for RS/6000 H50

Brands by name

Popular brands

IBM RS/6000 H50, Installation And Service Manual

Search results

Summary of Contents for RS/6000 H50

Reviews:

Related manuals for RS/6000 H50

Brands by name

Popular brands