IBM RS/6000 44P Series 270, User Manual

Page: 98 / 216

Error Log: Enables you to view and clear the firmware
error log information for your system unit. Go to “ErrorLog”
on page 85.
RIPL (Remote Initial Program Load): Enables you to
select a remote system from which to load programs
through a network adapter when your system unit is first
turned on. This option also allows you to configure
network adapters that are required for RIPL. Go to “RIPL”
on page 86.
SCSI ID: Allows you to view and change the addresses
(IDs) of the SCSI controllers attached to your system unit.
Go to “SCSI ID” on page 91.
Firmware Update: Allows you to update the system
firmware program. Go to “Firmware Update” on page 92.
Select Console:Allows the user to select which console
the user would like to use to display the SMS Menus. This
selection is only for the SMS Menus and doesnot affect
the display used by the AIX operating system.
Follow the instructions that display on the screen, select
the console from the screen. Press F1 the system will
start the boot to AIX. Go to “Select Console” on page 104.
Password
80
44P Series Model 170 User’s Guide