IBM RS/6000 44P Series 270, User Manual

Page: 102 / 216

If you type the password incorrectly, press the Esc key and start again.
If the two password entries do not match, an error icon displays with a message:
Password was attempted to be set
and an error code
Privileged Access: 20E00001
displays.
If you previously had set a privileged-access password and want to remove it, select
the Remove icon.
After you have selected the remove icon. The privileged-access status icon flashes and
changes to the unlock position to indicate that the privileged-access not set.
Note: After you have entered and verified the password, the privileged-access
password icon flashes and changes to the locked position to indicate that your
system unit now requires the password that you just entered before running
system programs.
Attention: If no user-defined bootlist exists and the privileged-access password has
been enabled, you are asked for the privileged-access password at startup every time
you boot your system.
Verify Password
84
44P Series Model 170 User’s Guide