IBM RS/6000 44P Series 270, User Manual

Page: 87 / 216

System POST Errors
If POST (Power-On Self-Test) errors occur during startup, this error log helps isolate
faults when used with the diagnostics.
Read System POST Errors
Version : 0
Severity : 0
Disposition : 0
Initiator : 0
Event being reported : 0
Extended Error Log Data:
0xC2 0x00 0x84 0x09 0x00 0x00 0x00 0x00
0x20 0x00 0x00 0x00 0x00 0x00 0x72 0x74
0x63 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x28 0x03 0x00 0x05 0x00 0x01
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x49 0x42 0x4D 0x00 0x55 0x30 0x2E 0x31
0x2D 0x50 0x31 0x2D 0x58 0x31 0x00
(Press Return to Continue)
Service Processor Operational Phases
This section provides a high-level flow of the phases of the service processor.
Pre-Standby Phase
This phase is entered when the server is connected to a power source. The server may
or may not be fully powered on. This phase is exited when the Power-On Self-Tests
(POST) and configuration tasks are completed.
The Pre-Standby phase components are:
v
Service Processor Initialization - Performs any necessary hardware and software
initializations.
SP Power Applied
Pre-Standby Phase
Standby Phase SP Menus Available
Bring-Up Phase SMS Menus Available
Runtime Phase AIX Login Prompt Available
Chapter 3. Using the Service Processor
69