IBM RS/6000 44P Series 270, User Manual

Page: 76 / 216

During the setup, the user should have entered the phone numbers for the Digital
Pager and Customer Voice for test purposes. These numbers are used to determine
whether call-out is working during the Call-Out Test.
The Call-Out Test should cause the user’s phone to ring. If the test is successful,
call-out is working properly. The user should now change the test Digital pager and
Customers Voice number to the correct numbers.
Call-Out policy can be set to first or all. If call-out policy is set to first, the service
processor stops at the first successful call out to one of the following numbers in the
order listed:
1. Service Center
2. Customer Administration Center
3. Pager
If call-out policy is set to all, the service processor attempts a call out to the following
numbers in the order listed:
1. Service Center
2. Customer Administration Center
3. Pager
v
Remote timeout and Remote latency are functions of your service provider’s
catcher computer. Either use the defaults or contact your service provider for
arecommended settings.
v
Number of retries is the number of times you want the server to retry calls that
resulted in busy signals or in other error messages.
Customer Account Setup Menu
This menu allows users to enter information that is specific to their account.
Customer Account Setup Menu
1. Customer account number:
Currently Unassigned
2. Customer RETAIN login userid:
Currently Unassigned
3. Customer RETAIN login password:
Currently Unassigned
98. Return to Previous Menu
1>
v
Customer account number is assigned by your service provider for record-keeping
and billing. If you have an account number, enter it. Otherwise, leave this field blank.
v
Customer RETAIN login userid and Customer RETAIN login password apply to a
service function to which your service provider may or may not have access. Leave
these fields blank if your service provider does not use RETAIN.
58
44P Series Model 170 User’s Guide