IBM RS/6000 44P Series 270, User Manual

Page: 73 / 216

For information on choosing a modem configuration file, see “Sample Modem
Configuration Files” on page 171 and “Transfer of a Modem Session” on page 175.
Modem Configuration Menu
Port 1 Modem Configuration File Name:
Port 2 Modem Configuration File Name:
To make changes, First select the port and then the configuration file
name
Modem Ports:
1. Serial port 1
2. Serial port 2
Modem Configuration File Name:
3. none
4. modem_f_sp
5. modem_f0_sp
6. modem_f1_sp
7. modem_z_sp
8. modem_z0_sp
9. modem_m0_sp
10. modem_m1_sp
30. Save configuration to NVRAM and Configure modem
98. Return to Previous Menu
Serial Port Selection Menu
This menu allows you to enable and/or disable the call-in functions of each serial port in
any combination.
Serial Port Selection Menu
1. Serial Port 1 Call-Out:
Currently Disabled
2. Serial Port 2 Call-Out:
Currently Disabled
3. Serial Port 1 Call-In:
Currently Disabled
4. Serial Port 2 Call-In:
Currently Disabled
98. Return to Previous Menu
Serial Port Speed Setup Menu
This menu allows you to set Serial port speed to enhance terminal performance or to
accommodate modem capabilities.
Chapter 3. Using the Service Processor
55