manualshive.com logo in svg

IBM Aptiva 2124, Hardware Maintenance Service

The IBM Aptiva 2124, a reliable desktop computer, offers exceptional performance and durability. Ensure its longevity with our comprehensive Hardware Maintenance Service manual, available for free download from our website. Access step-by-step instructions for troubleshooting and repairs to keep your Aptiva running smoothly for years to come.

Share
Download
background image

                                                                                                  Notice    VII

To Connect                                            To Disconnect

1.  

Turn Everything OFF.                       1. Turn Everything OFF.

2.  

First, attach all cables to devices.     2. First, remove power cord(s) from
                                                              outlet

3.  

Attach signal cables to receptacles.  3. Remove signal cables from
                                                               receptacles.

4.  

Attach power cord(s) to outlet.         4. Remove all cables from devices.

5.  

Turn device ON

NOTE: In the UK, by law, the
telephone cable must be connected
after the power cord.

NOTE: In the UK, the power cord
must be disconnected after the
telephone cable.

Summary of Contents for Aptiva 2124























































































































































































































































































































Reviews:

No comments

Related manuals for Aptiva 2124

Eaton XV-152 Series Operating Instructions Manual preview
XV-152 Series
Brand: Eaton Pages: 70
M-system 53U Instruction Manual preview
53U
Brand: M-system Pages: 8
Samsung SyncMaster 570S TFT Owner'S Instructions Manual preview
SyncMaster 570S TFT
Brand: Samsung Pages: 34
Samsung SyncMaster 510 MP User Manual preview
SyncMaster 510 MP
Brand: Samsung Pages: 61
Samsung SyncMaster 320P Manual Del Usuario preview
SyncMaster 320P
Brand: Samsung Pages: 71
Samsung SyncMaster 2494HM Manual Del Usuario preview
SyncMaster 2494HM
Brand: Samsung Pages: 98
Samsung SyncMaster 2494LW User Manual preview
SyncMaster 2494LW
Brand: Samsung Pages: 56
Samsung SyncMaster 400TSn-2 Guía De Inicio Rápido preview
SyncMaster 400TSn-2
Brand: Samsung Pages: 21
Samsung SyncMaster 320TSn-2 Service Manual preview
SyncMaster 320TSn-2
Brand: Samsung Pages: 74
Samsung SyncMaster 305TPLUS Guía De Inicio Rápido preview
SyncMaster 305TPLUS
Brand: Samsung Pages: 13
Samsung SyncMaster 400CXN Guía De Inicio Rápido preview
SyncMaster 400CXN
Brand: Samsung Pages: 25
Samsung SyncMaster S19B150N User Manual preview
SyncMaster S19B150N
Brand: Samsung Pages: 45
Samsung SyncMaster PX2370 User Manual preview
SyncMaster PX2370
Brand: Samsung Pages: 45
Samsung SyncMaster P2450H User Manual preview
SyncMaster P2450H
Brand: Samsung Pages: 46
Samsung SyncMaster P2370 Manual Del Usuario preview
SyncMaster P2370
Brand: Samsung Pages: 78
BenQ FP71G BLACK User Manual preview
FP71G BLACK
Brand: BenQ Pages: 35
A&A Tech EEM MOT 01 Operator And Maintenance Manual preview
EEM MOT 01
Brand: A&A Tech Pages: 16
Parker 71-113 Series Assembly Instructions preview
71-113 Series
Brand: Parker Pages: 4

Brands by name

Popular brands

Load more brands