manualshive.com logo in svg

IBM Aptiva 2124, Hardware Maintenance Service

The IBM Aptiva 2124, a reliable desktop computer, offers exceptional performance and durability. Ensure its longevity with our comprehensive Hardware Maintenance Service manual, available for free download from our website. Access step-by-step instructions for troubleshooting and repairs to keep your Aptiva running smoothly for years to come.

Share
Download
background image

Repair Information 4-9

Bays 1, 2 (5.25-In. Internal/External Bays)

•

 

Disconnect any cable on the drive (note location of cables).

•

 

Remove  the screws.

WARNING:  For 5.25-In. Hard Disk Drive installation, it uses different

screws than the 3.5-In Hard Disk Drive.

•

 

Pull out the drive.

•

 

Figure 4- 6

Bay 1 (5.25-In.)

Summary of Contents for Aptiva 2124























































































































































































































































































































Reviews:

No comments

Related manuals for Aptiva 2124

babymoov YOO Master 3.5 Instructions For Use Manual preview
YOO Master 3.5
Brand: babymoov Pages: 48
Crystal Image Technologies LCD-AP-F15 User Manual preview
LCD-AP-F15
Brand: Crystal Image Technologies Pages: 32
Summer IN VIEW 2.0 PLUS Quick Start Manual preview
IN VIEW 2.0 PLUS
Brand: Summer Pages: 2
Samtron SC-726GXL Service Manual preview
SC-726GXL
Brand: Samtron Pages: 115
Citizen CH-618 Instruction Manual preview
CH-618
Brand: Citizen Pages: 60
Westinghouse LCM-20v5 Brochure preview
LCM-20v5
Brand: Westinghouse Pages: 4
F&F FOX ENERGY 3 Mounting Instructions preview
FOX ENERGY 3
Brand: F&F Pages: 16
IBM G 78 User Manual preview
G 78
Brand: IBM Pages: 22
Brookstone BKWIFICAMB User Manual preview
BKWIFICAMB
Brand: Brookstone Pages: 28
Delta DOP-107 Instruction Sheet preview
DOP-107
Brand: Delta Pages: 2
Ametek ta3000R User Manual preview
ta3000R
Brand: Ametek Pages: 46
Suzohapp Vision Pro 150TFT 2206 Series Manual preview
Vision Pro 150TFT 2206 Series
Brand: Suzohapp Pages: 10
ViewSonic VX2257-mhd User Manual preview
VX2257-mhd
Brand: ViewSonic Pages: 26
Samsung NK15S series Service Manual preview
NK15S series
Brand: Samsung Pages: 65
Samsung OM55N-S User Manual preview
OM55N-S
Brand: Samsung Pages: 107
Samsung Odyssey Neo G7 S32BG75 N Series User Manual preview
Odyssey Neo G7 S32BG75 N Series
Brand: Samsung Pages: 50
Babyfon BM 880 ECO Instruction Manual preview
BM 880 ECO
Brand: Babyfon Pages: 26
NEC ShadowSense Touch MultiSync P404 SST User Manual preview
ShadowSense Touch MultiSync P404 SST
Brand: NEC Pages: 27

Brands by name

Popular brands

Load more brands