IBM 865951Y - Netfinity 5000 - 51Y, Hardware Maintenance Manual

Page: 61 / 220

The default value is Enabled. This value should not
be changed.
Ÿ
Boot Device Options
Select this choice to configure startable device
parameters. Before you can make updates, you must
know the ID of the device whose parameters you
want to configure.
Ÿ
SCSI Device Configuration
Select this choice to configure SCSI device
parameters. Before you can make updates, you must
know the ID of the device whose parameters you
want to configure.
Ÿ
Advanced Configuration Options
Select this choice to view or change the settings for
advanced configuration options. These options
include enabling support for large hard disk drives
and support for BIOS parameters if BIOS is enabled.
To reset to the the host adapter defaults, press F6; then,
follow the instructions on the screen.
SCSI disk utilities:
To see the IDs that are assigned
to each SCSI device, to format a SCSI device, or to scan
the disk for media defects, select SCSI Disk Utilities from
the SCSISelect Utility program menu.
To use the utility program, select a drive from the list.
Read the screens carefully before making a selection.
Note
If the following screen displays, you might have
pressed Ctrl
+
A before the selected drives were ready.
Restart the server, and watch the SCSISelect
messages as each drive spins up. After the drive that
you want to view or format spins up, press Ctrl
+
A.
à ð
Unexpected SCSI Command Failure
Target SCSI ID: 4
SCSI CDB Sent: ð3 ðð ðð ðð ðE ðð ð7 ðð ð2 ðð
Host Adapter Status: ððh - No host adapter error
Target Status: ð2h - Check condition
Sense Key: ð2h - Not ready
+Sense Code: ð4h
+Sense Code Qualifier: ð2h
Press 'Esc' to continue.
á ñ
Netfinity 5000 - Type 8659
53