IBM 865951Y - Netfinity 5000 - 51Y, Hardware Maintenance Manual

Page: 120 / 220

To remove the Netfinity 5000 from a rack enclosure:
1. Remove the screws from each front bracket. Set the
screws aside for later use.
2. Slide the server out of the rack.
3. If you have a modem or fax machine attached to the
server, disconnect the telephone line from the wall
outlet and the server.
Note
If you are in the United Kingdom, you must
perform this step before disconnecting the power
cord.
4. Disconnect all cables and power cords from the rear
of the server.
5. Remove the two screws from the cable-arm bracket.
6. Press the safety release latch on each slide rail.
7. Lift the server at a slight angle, and pull it from the
slide rails. Then place the server on a flat,
nonconductive surface.
112
Netfinity Server HMM