Start options:
Start options take effect when you
start the server.
You can select keyboard operating characteristics, such as
the keyboard speed. You also can specify whether the
keyboard number lock (NumLock) starts on or off. You
also can enable the server to run in disketteless and
monitorless operation.
You can specify the startup sequence the server is to use
to determine the device from which the operating system
loads. For example, you can define a startup sequence
that checks for a CD-ROM, then checks an installed hard
disk drive, and then checks a network adapter.
Attention: If the CD-ROM drive contains a startable CD,
you must remove the CD if you want to use a startup
sequence that begins with a startable diskette.
You can enable a virus-detection test that checks at
startup for changes in the master boot record. You also
can also choose to run POST in the enhanced mode or in
the quick mode.
Select Start Options; then, use the Left Arrow (
←
) or
Right Arrow (
→
) key to advance through each data field.
Advanced setup:
Select Advanced Setup to
change values for advanced hardware features, such as
cache control, PCI bus control, memory settings, and
advanced ISA settings.
Note
A warning message displays above the choices on
this menu, to alert you that the system may
malfunction if these options are configured incorrectly.
Follow the instructions on the screen carefully.
Use the Left Arrow (
←
) or Right Arrow (
→
) key to highlight
the options for the selected menu item.
Core chipset control:
Select this choice to modify
settings that control features of the core chip set on the
system board. The chipset control choices are:
IOQ Depth
Use this setting to control the in order queue
(IOQ) depth in the system. The value can be
varied from 1 to 8. This value should
normally be set at 8 (default)
Grant Timers Use this setting to enable or disable the
grant timer mechanism for each of the 5 PCI
slots. Enabling this will cause grant to be
asserted to a PCI bus agent for a minimum
of two clocks. This setting should normally
be set to disable (default)
Netfinity 5000 - Type 8659
29
Summary of Contents for 865951Y - Netfinity 5000 - 51Y
