IBM 865951Y - Netfinity 5000 - 51Y, Hardware Maintenance Manual

Page: 113 / 220

a. Extend the outer slide rail until the slide bracket
is flush against the outside of the left front
mounting rail. Align the slide rail with the cage
nuts on the mounting rail.
b. From the front of the rack enclosure, insert two
long screws through the slide bracket and
mounting rail. Press the slide bracket until it is
flush with the outer edge of the mounting rail;
then, tighten the screws.
c. Attach the slide bracket to the left rear side of
the rack enclosure.
1) Align the holes on the slide bracket with the
cage nuts on the rear mounting rail.
2) From the rear of the rack enclosure, insert
two long screws through the slide bracket
and mounting rail; then, tighten the screws.
3) If it was necessary to adjust the length of
the slide rails, tighten the nuts on the slide
rail, using pliers, a socket wrench, or an
adjustable wrench.
Netfinity 5000 - Type 8659
105