IBM 865951Y - Netfinity 5000 - 51Y, Hardware Maintenance Manual

Page: 114 / 220

4. Attach the slide rail to the right side of the rack
enclosure.
a. Extend the outer slide rail until the slide bracket
is flush against the outside of the right front
mounting rail. Align the slide bracket with the
cage nuts on the mounting rail.
b. From the front of the rack enclosure, insert two
long screws through the slide bracket and
mounting rail. Press the slide rail so that it is
flush with the outer edge of the mounting rail and
tighten the screws.
c. Attach the slide bracket to the right rear of the
rack enclosure.
1) Align the holes on the bracket with the cage
nuts on the rear mounting rail.
2) From the rear of the rack enclosure, insert
a long screw through holes in the slide
bracket and mounting rail; then, tighten the
screws.
5. Attach the cable-management arm to the right rear of
the rack enclosure.
106
Netfinity Server HMM