IBM 86594RY - Netfinity 5000 - 4RY, Hardware Maintenance Manual

Page: 115 / 220

a. Align the holes on the cable-management arm
mounting panel with the cage nuts on the rear
mounting rail.
b. From the rear of the rack enclosure, insert a long
screw through the holes in the
cable-management arm mounting panel and
cage nut; then, tighten the screws.
Notes
1. You can choose to wait to attach the
cable-management arm to the rack
until after you have attached the other
end of the cable-management arm to
the server.
2. To facilitate alignment of the
cable-management arm, be sure to
insert the screws through the first and
fourth holes, as shown.
Netfinity 5000 - Type 8659
107