IBM 86594RY - Netfinity 5000 - 4RY, Hardware Maintenance Manual

Page: 110 / 220

Installing the rack model in a rack
enclosure:
During this procedure, you must install
parts on the rack enclosure and the server. This process
can be divided into three parts:
Ÿ
Preparing the server
Ÿ
Preparing the rack enclosure
Ÿ
Installing the server into the rack enclosure
Before you begin
Ÿ
Read “Safety information” on page 176 and the
safety information in the rack enclosure
documentation.
Ÿ
Turn off the server, if it is on.
Ÿ
Refer to the rack enclosure documentation for
additional information on preparing the rack.
Preparing the server:
In this section, you will use the
following parts:
Ÿ
One cable arm bracket
Ÿ
The inner slide from two slide bracket assemblies
Ÿ
6 pan-head short screws (M4 by 5 mm)
Caution
Use safe lifting practices when lifting the machine.
Attention
To avoid damage to internal components, use only the
pan-head short screws (M4 by 5 mm) included with
the Rack Mount Kit.
k
32 kg (70.5 lbs)
k
55 kg (121.2 lbs)
102
Netfinity Server HMM