IBM 86594RY - Netfinity 5000 - 4RY, Hardware Maintenance Manual

Page: 30 / 220

Configuration/Setup utility usage
From the Configuration/Setup Utility program main menu
you can select settings you want to change.
Pressing F1 displays Help information for a selected menu
item.
Notes
1. If you enter only the power-on password and an
administrator (supervisor-level) password is also
set, a limited version of the menu appears. To
view the full Configuration/Setup Utility menu you
must enter the administrator password.
2. The choices on some menus might differ slightly,
depending on the BIOS version that comes with
the server.
To change configuration settings:
1. Use the Up Arrow (
↑
) key to select the item you want
to change; then, press Enter.
2. Select the configuration setting you want to change.
Use the Right Arrow (
→
) or Left Arrow (
←
) key to
highlight the menu, if needed.
3. Use the Right Arrow (
→
) or Left Arrow (
←
) key to
select the appropriate setting for the selected item.
4. Repeat Steps 1 through 3 for each setting that you
want to change. Press Esc to return to the
Configuration/Setup Utility main menu.
5. After making changes, you can select:
Ÿ
Save Settings to save the selected changes.
Ÿ
Restore Settings to delete the selected
changes.
Ÿ
Load Default Settings to cancel the changes
and restore the factory settings.
6. To exit from the Configuration/Setup Utility main
menu, select Exit Setup.
7. The system prompts you to confirm your choice. You
can return to the Configuration/Setup Utility main
menu, or exit.
System summary:
Select this choice to display
configuration information, such as the type and speed of
the microprocessor, and amount of memory.
Changes that you make to configuration settings appear on
this summary screen. You cannot edit the fields.
22
Netfinity Server HMM