IBM 86594RY - Netfinity 5000 - 4RY, Hardware Maintenance Manual

Page: 25 / 220

Checking the system for damage
This section provides instructions on what to do if the
system might be damaged.
After dropping it:
Look for loose cables and
obvious damage. If any cables are loose, reconnect them
securely.
If you see no damage, turn on the system. If it works
correctly, the system probably did not suffer any damage.
If the system does not work correctly, turn it off and check
the adapters and memory modules to ensure that they are
connected correctly. Reseat all adapters and memory
modules.
If the system still does not work correctly, run the
diagnostic tests from diagnostic utility menu. For
information about running tests, see “Running Diagnostic
test programs” on page 12.
After spilling liquid on it:
If liquid gets on the
keyboard:
1. Turn off the server.
2. Unplug the keyboard from the back of the server.
3. Turn the keyboard upside down to drain excess liquid.
4. Dry off the keyboard with a lint-free cloth.
After the keyboard is completely dry, plug it in and turn on
the server. If it does not work correctly, replace the
keyboard.
If liquid gets inside the monitor:
1. Turn off the monitor.
2. Turn off the server.
3. Unplug the monitor from the server and the electrical
outlet.
4. Let the monitor dry out.
If liquid gets inside the server:
1. Turn off the server and all attached devices.
2. Unplug the server from the electrical outlet and all
attached devices.
3. Let the server dry out.
Netfinity 5000 - Type 8659
17