IBM 86594RY - Netfinity 5000 - 4RY, Hardware Maintenance Manual

Page: 69 / 220

Battery
IBM has designed this product with safety in mind. The
lithium battery must be handled correctly to avoid possible
danger.
Caution
When replacing the battery, use only IBM Part
Number 33F8354 or an equivalent type battery
recommended by the manufacturer. If the system has
a module containing a lithium battery, replace it only
with the same module type made by the same
manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
Ÿ
Throw or immerse into water
Ÿ
Heat to more than 100°C (212°F)
Ÿ
Repair or disassemble
Dispose of the battery as required by local ordinances
or regulations.
Note
In the U.S., please call 1-800-IBM-4333 for information
about battery disposal.
If you replace the original lithium battery with a
heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental
consideration. Batteries and accumulators that contain
heavy metals must not be disposed of with normal
domestic waste. They will be taken back free of charge by
the manufacturer, distributor, or representative, to be
recycled or disposed of in a proper manner.
Before you begin, be sure you have:
Ÿ
Read “Safety information” on page 176.
Ÿ
Followed any special handling and installation
instructions supplied with the replacement
battery.
Ÿ
Removed the server side cover (see “Option
installation” on page 125).
Note
After you replace the battery, you must reconfigure the
system and reset the system date and time.
Netfinity 5000 - Type 8659
61