IBM 86594RY - Netfinity 5000 - 4RY, Hardware Maintenance Manual

Page: 107 / 220

Installing a server in a rack enclosure
Use the following instructions for installing a Netfinity 5000
rack model in a server rack enclosure.
Ÿ
If you have a rack model, the server comes with the
necessary rack mounting hardware. Review the
preinstallation information in “Before you begin” on
page 100; then, continue at “Installing the rack model
in a rack enclosure” on page 102.
Ÿ
If the Netfinity 5000 is a tower model and you want to
install it as a rack model in a server rack enclosure,
you must order the Netfinity Rack Mount Kit. This kit
contains the appropriate front, top, and bottom
covers, in addition to the brackets and the
cable-management arm that you need to install the
server into the rack. Follow the instructions that are
included in the Rack Mount Kit.
Netfinity 5000 - Type 8659
99