IBM 6400-i05, Setup Manual

Page: 77 / 370

Loading And Starting The Power Paper Stacker
77
Set The Top-of-Form
Figure 61. The Forms Thickness Level in the Raised Position
1. Raise the forms thickness lever as far as it will go. The “CLOSE PLATEN”
message appears on the operator panel.
2. Press any key on the operator panel to silence the alarm.
Figure 62. The First Print Line Aligned with the TOF Indicator
3. Locate the TOF indicator. It is the small tab located on the left tractor
door.
4. Turn the vertical position knob up or down to align the top of the first print
line with the TOF indicator. For best print quality, it is recommended that
the top-of-form be set at least 1/2 inch below the perforation.
NOTE: For exact positioning, press the Micro or Micro keys to move the
paper vertically in 1/72 inch increments. The keys work in both online
and offline mode.
Vertical Position Knob
Forms Thickness Lever
TOF Indicator
Perforation
Vertical Position Knob
Set The Top-of-Form