IBM 6400-i05, Setup Manual

Page: 320 / 370

320
Appendix D
Attaching Printer to zSeries Systems
6400-LU3-DSE-Local SNA 3174 Control Unit
LU3-DSE mode is utilized when no host printing controls are required to
accomplish the print function desired. The printer settings will be used and
cannot be overridden by the host system. An existing local 3174 SNA-
connected control unit is assumed. The steps required to install an LU1-DSE
printer for host definitions are as follows:
1. Define to VTAM by adding logmode entry to VTAM Logmode Table
2. Define to JES2 (Not required but recommended. See details below)
3. Define to CICS or another Application Program such as VPS or JES328X
products.
4. Select the options on the printer that are appropriate for the environment.
Step 1 - VTAM Definition
The following should be added to the Local Major Node VTAM definition. The
printer will be attached as an LU1-IPDS capable printer.
LOC3174 VBUILD TYPE=LOCAL
LOCPU74 PU CUADDR=nnn...
LOC6400 LU
LOCADDR=n,MODETAB=MYMODETB,DLOGMODE=printer,ISTATUS=AC
TIVE
The following entry should be placed in the VTAM MODE TABLE specified
above or another of your choice.
6400DSEL MODEENT LOGMODE=6400DSEL,
FMPROF=X’03’,TSPROF=X’03’,PRIPROT=X’B1’,
SECPROT=X’20’,COMPROT=X’3080’,RUSIZES=X’C7C7’,
PSERVIC=X’038000000000185018507F00’
PSNDPAC=X’00’,SRCVPAC=X’00’,SSNDPAC=X’00’
Step 2 - JES2 Definition (SYS1.PARMLIB)
RMT1
LUTYPE3,BUFSIZE=3840,LINE=1,NUMRD=0,NUMPR=1,NOCOMP,NOCM
PCT,
SETUPHDR,CONSOLE
R1.PR1
CLASS=A,NOSEP,PRWIDTH=132,NOFCBLOD,WS=(W,R,Q,PMD,LIM,F,T/
C,P),
CKTPAGE=30
DESTID NAME=LOC6400,DEST=R1