IBM 6400-i05 Setup Manual Download Page 270

Page: 270 / 370

270

Chapter

Running The Printer Self–Tests

Step

Key

Result

Notes

Make that the ribbon is installed and the printer is powered on and loaded with paper.

Press

NOT READY

Places the printer in NOT
READY mode.

OPERATOR MENU
UNLOCKED

Press both keys at the
same time. Unlocking the
Operator Menu allows you
to test your printer.

OPERATOR MENU
PRINTER CONTROL

First of the series of
configuration menus.

OPERATOR MENU
OPERATOR PRINT TESTS

Advances to the
OPERATOR PRINT
TESTS menu.

OPERATOR PRINT TESTS
PRINTER DEMONSTRATION*

Advances to PRINTER
DEMONSTRATION, the
first option in OPERATOR
PRINT TESTS menu.

OPERATOR PRINT TESTS
[TEST NAME]

Cycles through the list of
print tests until you reach
the name of the test you
wish to run.

OPERATOR PRINT TESTS
[TEST NAME]

The print test you have
selected starts printing at
either 80 or 136 columns,
as specified.

Stop

Scroll

UNTIL

Enter

Scroll

UNTIL

Enter

Summary of Contents for 6400-i05



















































































































































































































































































































































































Search results

Summary of Contents for 6400-i05

Reviews:

Brands by name

Popular brands

IBM 6400-i05, Setup Manual

Search results

Summary of Contents for 6400-i05

Reviews:

Brands by name

Popular brands