IBM 6400-i05, Setup Manual

Page: 215 / 370

Code V Emulation Menu
215
IGP110 Compatibility
•
Enable (the default). This menu will process ^IPEXP commands in the
same manner the IGP does, and does not expand special font characters
if an ^IPEXP command precedes it.
•
Disable. If disabled, it will allow the special font characters to be
expanded.
Inline Graphics
•
Disable (the default). Requires the printer move to the beginning of the
line to start a graphic.
•
Enable. Permits Code V graphics to start in the middle of a print line as
opposed to moving to the beginning of the line to start a graphic.
Error Handling
Error Messages
•
Enable (the default). Checks command syntax and prints error
messages when command parameters are incorrect.
•
Disable. Suppresses error checking and error messages.
Error Markers
•
Enable (the default). Prints the following error markers for those
elements that print beyond the page boundaries:
>> for elements that begin off the right side of the page;
<< for elements that begin at the indicated position but end off the
page
for elements where the starting position of the command contains
an error other than an off-page error.
•
Disable. Does not print error markers for those elements that print
beyond the page boundaries.
Off Page Errors
•
Disable (the default). Does not report errors for elements that start or
end beyond the right edge of the page.
•
Enable. Reports errors for elements that start or end beyond the right
edge of the page.