IBM 3745 130 Maintenance Information Procedures Download Page 127

Page: 127 / 361

3745 and Service Processor Maintenance

Service Processor Maintenance Using an SRC Sequence Number

The service processor console should be logged ON. If it is not, go to “Console Use for Maintenance” on
page 1-1 for logging ON and return here.

1. On the MOSS-E View window, double click on the service processor icon.

2. The Service Processor Menu window is displayed.

3. Click on the Problem management option.

4. Double-click on the Manage Alarms/Errors/Events (SRCs) option.

5. Select the Alarm option then click on OK.

6. On the next window, double-click on the alarm which has the SRC number that you want.

7. A FRU or a list of FRUs with the FRU location is displayed.

8. Record this FRU list with each card fault probability.

9. Go to "Service Processor Problem Determination" in the corresponding

Service Processor Installation

and Maintenance manual.

Chapter 1. START: How to Begin Troubleshooting

1-57

Summary of Contents for 3745 130










































































































































































































































































































































































Search results

Summary of Contents for 3745 130

Reviews:

Related manuals for 3745 130

Brands by name

Popular brands

IBM 3745 130, Maintenance Information Procedures

Search results

Summary of Contents for 3745 130

Reviews:

Related manuals for 3745 130

Brands by name

Popular brands