IBM 17 S544-5343-03, User Manual

Page: 117 / 258

TWINAX SCS
MENU ITEM
VALUE Description
CPI nn Specifies the default characters per inch, or pitch. nn can be 5,
10, 12, 15, 17.1, 20, or 27. The default is 10.
CODE PAGE nnn Specifies the default code page to use. The default value is code
page 037.
037 U.S.A. and Canada
273 Austrian/German
274 Belgium
275 Brazil
277 Danish/Norwegian
278 Finnish/Swedish
280 Italy
281 Japanese (Latin)
282 Portugal
284 Spanish (Latin America)
285 United Kingdom
297 France
500 Multinational (International #5)
871 Iceland
APO ENABLE*
DISABLE Enables or disables automatic print orientation.
Ÿ ENABLE—if the requested dimensions of the job fit on the
paper, the page is printed either in portrait or landscape,
whichever better fits the dimensions. If the requested
dimensions do not fit on the paper, the default orientation for
the tray (COR, PORT, LAND, or C-PORT) determines how
the sheet is printed.
Ÿ DISABLE—the page prints using the default orientation for
the tray (COR, PORT, LAND, or C-PORT).
Notes:
1. Values specified in the data stream override values set at the
printer.
2. The factory defaults (orientation set to COR and
APO=ENABLE) give you the most flexibility.
3. The
requested dimensions are determined by the values of
CPI, MPP, and MPL for the job. These values can be set in
the data stream. CPI can be set on the Twinax SCS menu.
The twinax default values for MPP and MPL cannot be set
from a menu; they are 132 for MPP and 62 for MPL.
Chapter 5. Operator Panel Menus
97