IBM 17 S544-5343-03 User Manual Download Page 194

Page: 194 / 258

The Envelope Feeder Option

The envelope feeder lets you print large runs of various envelope sizes.

Envelope sizes

Commercial #10 — 4.125 x 9.5 in. (104.8 x 241.3 mm)

Monarch — 3.875 x 7.5 in (98.4 x 190.5 mm)

DL — 110 x 220 mm (4.4 x 8.8 in.)

C5 — 62 x 229 mm (6.48 x 9.16 in.)

Envelope weights

16 lb to 28 lb (60 grams/meter

to 105 grams/meter

)

Envelope feeder
capacity

75 envelopes

Installing the Envelope Feeder

Use the following procedure to install the envelope feeder:

1. Switch the printer power off.

2. Unplug the printer from the wall outlet.

3. Remove the power cord from the back of the printer.

4. Unpack the envelope feeder and save the packing materials for future use.

5. Open the auxiliary tray by pushing in on the top of the auxiliary tray.

174

Network Printer 17: User’s Guide

Summary of Contents for 17 S544-5343-03



































































































































































































































































Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands

IBM 17 S544-5343-03, User Manual

Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands