IBM 17 S544-5343-03 User Manual Download Page 37

Page: 37 / 258

3. To restore the printer to READY status, press the Online key.

Note: The Page Eject key is valid only for PCL5e jobs; it does not print pages of
PostScript or IPDS jobs.

Printing a List of PCL5e Fonts

Situation: You want to see a list of the PCL5e fonts installed on the printer.

Action:

1. Press the Online key to take the printer offline.

2. Press the Menu key. TEST MENU appears in the display area.

3. Press the Item key until you see PRINT PCL FONTS.

4. Press the Continue/Enter key to print the PCL5e fonts list.

5. After the page prints, press the Online key to restore the printer to READY status.

Printing a List of PostScript Fonts

Situation: You have the optional PostScript Level 2 SIMM installed on your printer and
you want to see a list of the PostScript fonts.

Action:

1. Press the Online key to take the printer offline.

2. Press the Menu key. TEST MENU appears in the display area.

3. Press the Item key until you see PRINT PS FONTS. This item appears only if you

have the optional PostScript Level 2 SIMM installed on your printer.

4. Press the Continue/Enter key to print the PostScript fonts list.

5. After the page prints, press the Online key to restore the printer to READY status.

Printing a List of IPDS Resident Fonts

Situation: You have the optional IPDS SIMM installed on your printer and you want to
see a list of the IPDS resident fonts.

Action:

1. Press the Online key to take the printer offline.

2. Press the Menu key. TEST MENU appears in the display area.

3. Press the Item key until you see PRINT IPDS FONTS. (This item appears only if

you have the optional IPDS SIMM installed on your printer.)

4. Press the Continue/Enter key to print the IPDS resident fonts list.

5. After the page prints, press the Online key to restore the printer to READY status.

Chapter 2. Using the Operator Panel

Summary of Contents for 17 S544-5343-03



































































































































































































































































Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands

IBM 17 S544-5343-03, User Manual

Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands