IBM 17 S544-5343-03 User Manual Download Page 192

Page: 192 / 258

16. Use the Mailbox Menu to enable the bins and manage the output. See “Using the

Mailbox” on page 44.

17. Make sure you update your printer driver to indicate the mailbox is installed.

Removing the Mailbox

Use the following procedure to remove the mailbox:

1. Switch the printer power off.

2. Switch the mailbox power off.

3. Unplug the power cord from the wall outlet.

4. Remove both power cords from the back of the mailbox.

5. Unplug the power cord from the back of the printer. Keep this power cord with the

mailbox.

6. Facing the back of the printer, pull up on the mailbox with one hand while you

press the release buttons with the other hand.

7. Firmly hold the mailbox, and lift it off the printer. Place the mailbox on a flat stable

surface.

172

Network Printer 17: User’s Guide

Summary of Contents for 17 S544-5343-03



































































































































































































































































Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands

IBM 17 S544-5343-03, User Manual

Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands