IBM 17 S544-5343-03 User Manual Download Page 137

Page: 137 / 258

Changing the Usage Kit

The usable life of the usage kit depends on the type of paper you use and the type of
output you print.

The part numbers for replacement usage kits are:

Model 001 (120 volt): 63H2324

Model 002 (230 volt): 63H2325

Removing the Used Fuser Unit

Use the following procedure to remove a used fuser unit:

1. Power off the printer.

2. Unplug the printer power cord from the wall outlet.

3. Remove the power cord from the back of the printer.

CAUTION:
Do not touch the fuser (labeled) inside the printer. It can be extremely hot.
Always wait at least 40 minutes for the fuser to cool down.

4. Press the release lever and open the back cover.

CAUTION:
Be careful when removing the duplex unit. The small motor at the end of the
duplex unit may be hot.

Chapter 6. Maintaining the Printer

117

Summary of Contents for 17 S544-5343-03



































































































































































































































































Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands

IBM 17 S544-5343-03, User Manual

Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands