IBM 17 S544-5343-03 User Manual Download Page 156

Page: 156 / 258

Installing a Network Interface Card

Important

Follow the instructions for handling static-sensitive devices described on page 127.

Use the following procedure to install a Network Interface card:

1. Unpack the network interface card, and set aside the software and documentation

that arrived with the card.

2. If you are installing a token ring card, you must complete the following procedure to

set the line speed for the card. If you are not installing a token ring card, skip this
step and go to Step 3.

a. Lay the token ring card in front of you with the faceplate towards you.

b. On the right, rear side are six pins and two small jumpers.

If you are installing the card for a 4Mbps network, place a jumper over the
pins labeled 4.

136

Network Printer 17: User’s Guide

Summary of Contents for 17 S544-5343-03



































































































































































































































































Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands

IBM 17 S544-5343-03, User Manual

Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands