IBM 17 S544-5343-03 User Manual Download Page 167

Page: 167 / 258

Stacking Two 500-Sheet Paper Trays

Use the following procedure to stack and fasten two optional 500-sheet paper tray
support units:

1. Lift one of the paper tray support units by the recessed grips and set it on top of

the other support unit. The front of each paper tray must face the same direction.

2. Make sure the upper support unit is aligned with the lower support unit and that the

upper unit is correctly seated on the lower unit. The front of the paper trays should
be aligned.

Chapter 7. Installing Printer Options

147

Summary of Contents for 17 S544-5343-03



































































































































































































































































Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands

IBM 17 S544-5343-03, User Manual

Search results

Summary of Contents for 17 S544-5343-03

Reviews:

Related manuals for 17 S544-5343-03

Brands by name

Popular brands