ibidi Gas Incubation System – Silver Line
4.5
Humidity Sensor
The humidity sensor measures the humidity inside the incubation chamber, enabling fast, active
humidity control.
The ibidi Heating System Slide/Dish comes with the humidity sensor integrated in the Heated Lid
of the Incubation Chamber (Figure
Humidity and
temperature
sensor
opening
Electrical
connection
to Heated
Plate
Figure 8: Humidity sensor integrated into the Heated Lid of the Incubation Chamber of the ibidi
Heating System Slide/Dish.
The humidity sensor is integrated in a small cavity inside the Heated Lid. The humidity sensor is
connected with the Heated Plate via the electrical connection pins of the Heated Lid. The cable of
the Heated Plate guides the information of the humidity sensor to the Temperature Controller. For
connection with the Gas Mixer an extra bridge cable is needed (see chapter
Please note that when using an Incubation Chamber 4 Slides (product numbers 12130, 12131) or an
Incubation Chamber Multiwell Plate (product numbers 12150, 12151, 12724, 12726), a different hu-
midity sensor is in use. Please see the instruction manual version
“for use with the ibidi Heating
System 4 Slides – Silver Line and ibidi Heating System Multiwell Plate – Silver Line”
for more infor-
mation.
Version 1.0 (June 1, 2022)
22
Instruction Manual
