ibidi Gas Incubation System – Silver Line
Figure 20: Maximum O
2
concentrations at different CO
2
concentrations in gas mixtures from the Gas
Mixer.
5.4.3
Setup Menu
The Setup menu offers the possibility to change the settings of the individual channels and the dis-
play. Please note that for standard operation, no changes need to be made. Enter the setup menu by
navigating to the “Setup” entry and pressing the round button. The mode dialog will open.
Mode
Each channel of the Gas Mixer can be set to an “On” or “Off” state. For standard operation all
channels must be turned on. Only if you use the CO
2
/O
2
version without nitrogen (N
2
) connection,
it is recommended to turn the O
2
channel off. In this case make sure that the dead-end tubing is
attached to the N
2
port and closed.
<Mode>
Setup
Channel = 1
Mode = On
Return
Figure 21: Mode dialog.
1. Press the round button once more to move the cursor to the channel number.
2. Select the respective channel and confirm with the round button.
3. Select “On” or “Off” and confirm with the round button.
4. To move on navigate to “Return” and press the round button.
Instruction Manual
33
Version 1.0 (June 1, 2022)
