IAI IA-101-X-MW, Operation Manual

Page: 228 / 392

11. Monitor
220
7) Click on the button to start monitoring and output a graph.
Click on button, and monitoring process stops.
Fig. 11.39 Servo + I/O Data Graph
<I/O Data Graph Display Setting>
● Adjust the level difference of port on/off (output multiplying factor) in the output multiplying factor setting
in the data type select (Fig. 11.34).
● Adjust the vertical axis position in port off level in the offset setting in the data type select (Fig. 11.34).
● The graph display setting in I/O data can be adjusted also when the monitor is in stop. Adjust the position
for your comfort for monitoring.
[Graph Display Setting]
Output Multiplying
Factor = Doubles
Offset = 0
[Graph Display Setting]
Output Multiplying
Factor = Twice
Offset = +3