IAI IA-101-X-MW, Operation Manual

Page: 14 / 392

6
A Word of Caution
[1] This software is copyrighted by IAI Corporation (IAI).
[2] The software and the manual can only be used under the terms and conditions of the license agreement.
[3IAI cannot assume responsibility for any damage or loss resulting from the use of this software or the manual.
[4] Please note that the version or edition number printed on the face of this manual does not correspond to the
software version number.
[5] The content of this manual is subject to change without notice.
[6] The software runs with the Windows operation systems listed in the table below. Accordingly, it is a
prerequisite to have a basic Windows operating environment to use this software.
(Note, however, that Windows is not included with the software.)
Port used Type Operable Windows
RS-232C
IA-101-X-MW-JS
IA-101-X-MW
IA-101-XA-MW
Windows 7
*1
, Windows 8, 8.1
*2
, or Windows 10
*3
USB
IA-101-X-USBS
IA-101-X-USBMW
IA-101-TT-USB
IA-101-TTA-USB
IA-101-N
(Note 1)
Windows 7
*1
, Windows 8, 8.1
*2
, or Windows 10
*3
*1: Supported by software version V8.01.00.00 or later.
*2: Supported by software version V12.01.00.00 or later.
*3: Supported by software version V13.01.00.00 or later.
Note 1 There is no cable enclosed. Please prepare yourself an USB cable to connect to the USB connector on
XSEL-RA/SA/RAX/SAX/RAXD/SAXD Controllers.
Microsoft, MS, MS-DOS, Windows, Windows 3.1, Windows 95, Windows 98, Windows NT, Windows 2000,
Windows Me, Windows XP, Windows Vista, and Windows 7, Windows 8, Windows 8.1, Windows 10 are
registered trademarks of Microsoft Corporation.
Copyright© 2001 Jun. IAI Corporation. All rights reserved.