manualshive.com logo in svg

i-CAT FLX, Installation Manual, Page: 69 / 106

Share
Download
i-CAT FLX Installation Manual Download Page 69

3-31

Load Clinical Software and Configure System

032-0330-EN  Rev K 

4.

Disable All PM Exam Output

 - When selected, disables the creation of the PM interface return 

path folder and all of its contents. This option may be used if a site does not use the PM system 
for storing images.

5.

In Study Path Options:

NOTE: 

The Study Path (Image Database Folder) must be defined for a viewer (TxSTUDIO, 

Dolphin 3D) for it to be able to display exam images. Each viewer may obtain this path in a 
different way from different PM systems. An absolute path should work in most situations, 
where the study path retrieved from the return XML file is passed as-is to the viewer. If the 
viewer cannot locate exam images in this way, a relative path must be defined.

• Absolute

 (default) - Obtains the path for the Image Database Folder location from the return 

XML file. No additional configuration is needed. Be sure that this option works with all 
viewers that will be used with the PM system. Otherwise, define a relative path.

• Relative

 - When selected, adds the Image Database Folder location to the front of the study 

path that is provided to the viewer. The Image Database Folder location must be defined in 
the SmartScan STUDIO Launcher Configuration for this purpose.

a. From the Start menu, select 

All 

Programs>Dental Imaging Technologies 
Corporation>SmartScan STUDIO 
LPM_Launcher

.

b. Enter or browse to the Image Database 

Folder path.

c. Click 

OK

.

6.

Click 

Save & Restart

 on SmartScan STUDIO 

Integration Services.

Installation Check

Installation Check for i-CAT FLX Installation

1. At clinical workstation, enter data for a test patient and schedule exam.

2.

At scanner controller, capture a scan for test patient.

a.

Set up a phantom on the scanner.

b. Access 

Acquire

.

c.

Select 

TestPatient

 from Scheduled Exams list and press 

.

d.

Select a protocol and press 

.

e.

Take a scan.

f.

Review image and press 

 to complete.

3. At clinical workstation, locate test patient data.

4.

View scan in TxSTUDIO and ensure correct path to the TxSTUDIO Cases folder displays in File 
Manager.

Summary of Contents for FLX











































































































Reviews:

No comments