i-CAT FLX, Installation Manual, Page: 47 / 106

3-9
Load Clinical Software and Configure System
032-0330-EN Rev K
• Default gateway
• Preferred DNS server
• Alternate DNS server
2. Select Configurator , and then Network .
3. Select Use the following IP address option and
enter IP addresses for the following:
• IP Address (scanner controller)
• Subnet mask
• Default gateway
4. Select Use the following DNS server address
option and enter addresses for the following:
• Preferred DNS server
• Alternate DNS server
5. Click Save .
Configure DHCP Reservation Addresses
NOTE: The site IT department can reserve IP addresses before they are obtained by the
Configurator, or reserve them after they have been obtained by the Configurator.
Addresses are Reserved in Advance:
1. Select Configurator , and then Network .
2. Select Obtain an IP address automatically and Obtain DNS server address automatically
options.
3. Click Save .
4. Close Configurator, then restart it. The address fields should be populated in the Configurator.
5. Verify with the site IT department that these addresses are correct and will always be assigned
to the devices.
Addresses are Reserved After Obtained by Configurator:
1. Perform steps 1 - 4 above.
2. Record the IP and DNS server addresses in the five fields shown above. Request that the site
IT department reserve them so that these addresses will always be assigned to the devices.
Risk of Changes to Site Network
The site IT department should be aware of the following:
1. Connection of the i-CAT FLX to the customer network/data coupling that includes other
equipment could result in previously unidentified risks to patients, operators, or third parties.
2. The customer should identify, analyze, evaluate and control these risks.