3-20
i-CAT FLX Technical Guide
032-0328-EN Rev K
QA PAN Test
Install PAN Phantom
1.
Prepare the bite tip by inserting the narrow edges of the bite tip down into the bite tip
holder uprights. Then turn the bite tip a ¼ turn to lock into place.
2.
Insert the phantom platform and bite tip holder into the positioning block. The bite tip
should rest on top of the platform.
3.
Place PAN phantom on platform with balls facing up and top of arch resting on bite tip.
4.
Use the Alignment Lasers to position the phantom. Use the horizontal laser to adjust the
height of the phantom as shown below. Use the vertical laser to center the phantom on
the platform.
Run QA PAN Test
1.
From Utilities menu, select
QA PAN
.
2.
Ensure phantom is set up properly, then press
.
3.
Select
, then press
. The scanner initializes.
PAN
PHANTOM
PHANTOM
BITE TIP HOLDER
BITE TIP
LASER
LINE
PLATFORM
Summary of Contents for FLX V Series
