![background image](http://html.mh-extra.com/html/i-cat/flx-v-series/flx-v-series_technical-manual_602044031.webp)
3-19
Calibrations and Quality Assurance
032-0328-EN Rev K
16. Repeat steps 14-15 for the lower left, upper right and lower right quadrants, and at the
center.
17. Record the Mean values in the chart below.
18. Remove measurements by clicking each one, then press the
Delete
key on the
keyboard.
19. Subtract each
Mean Value
from the
Mean Value
of the center measurement. If the
difference is
greater than 90
, make sure phantom is correctly centered in the field of view
and re-measure.
20. When finished, save the file and close TxSTUDIO.
Measured
Values
Upper
Left
Upper
Right
Lower
Left
Lower
Right
Center
Mean
Summary of Contents for FLX V Series
