i-CAT FLX V Series, Technical Manual, Page: 92 / 122

B-32
i-CAT FLX Technical Guide
032-0328-EN Rev K
Recommended Separation Distances between Portable and Mobile RF Communications
Equipment and the
i-CAT FLX
The
i-CAT FLX
is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the
i-CAT FLX
can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the
i-CAT FLX
as recommended below,
according to the maximum output power of the communications equipment.
Rated Maximum
Output Power of
Transmitter W Separation Distance according to Frequency of Transmitter m
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.74
1 1.2 1.2 2.3
10 3.8 3.8 7.4
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended
separation distance
d in metres (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
Note 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
Note 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.