2-1
032-0328-EN Rev K
Chapter
2
Startup and Shutdown
Scanner Startup
The scanner and scanner controller are powered independently, Both must be on to function
properly and are available for use immediately after startup. No warm up is required.
Power Up
1.
Power up the scanner
:press the ON button on the operator control box.
The POWER indicator on the operator control box and scanner should
light.
2.
Power up scanner controller and touch screen:
press the power
button on the front of the scanner controller. The log in screen is
displayed.
CAUTION
If the scanner or the scanner controller is powered off, at scanner power up or scanner
controller boot up, when the first scan is initiated (scout or full scan), the system
performs a reset procedure that may delay the start of first scan.
Log in
Two log in account types are available for site use. The site administrator will assign the
account type to site personnel. A typical user will log in directly to SmartScan STUDIO. A site
administrator log in account accesses an administration menu. Refer to
Site Administration
for information.
To log in to SmartScan STUDIO
on the scanner controller:
1.
Enter your user name and password.
2.
Press
to log in.
NOTE:
Refer to the
i-CAT FLX User Manual
for information about using SmartScan
STUDIO for the scanning workflow.
Summary of Contents for FLX V Series
