
A-5
Safety Information
032-0328-EN Rev K
Radiation Protection Measures
Use the following measures to protect yourself and the patient from unintended exposure to
radiation. Anyone who is near the patient during test procedures must observe the following
precautions:
•
Maintain adequate distance from exposed radiation source.
•
Keep exposure times to a minimum, especially for pediatric patients.
•
Use protective clothing (lead apron, etc.) for all patients.
•
When scanning children, be aware that, due to their physical constitution, they react
more sensitively to X-ray radiation.
•
Wear a PEN dosimeter and/or film badge.
•
The physician is responsible for protecting the patient from unnecessary radiation.
Safety Devices
Emergency Stops
In the event of an emergency, the operator and/or patient should use the Emergency Stop
buttons to turn off the power to all moving parts in order for the patient to be safely removed
from the scanner. Emergency Stop buttons are located on the operator control box and the
Patient Emergency Stop control. An emergency could arise if any moving component collides
with any parts of the scanner or items in the environment, or if the patient moves or needs
immediate assistance for some reason.
If the Emergency Stop button is pressed, the message
The Emergency Stop button was
activated
is displayed in a dialog box. The dialog box instructs the operator to clear the
patient environment. The operator should lower the chin support and remove the patient or
other obstacles. To reset an Emergency Stop button, turn button clockwise. When completed,
the operator should press OK on the dialog box. The scanner recovers automatically and will
initialize for normal use.
Warning System
The scanner is equipped with provisions for warning lights and/or audible alarms when X-ray
power is energized. An externally powered warning system can be connected to the cable
provided which is capable of 250 volts, 50/60 hertz, and 2.5 amps. When X-ray power is
energized the warning system is also energized.
Summary of Contents for FLX V Series
