manualshive.com logo in svg

i-CAT FLX V Series, Technical Manual, Page: 39 / 122

Share
Download
i-CAT FLX V Series Technical Manual Download Page 39

4-3

Site Administration 

032-0328-EN   Rev K 

Delete Accounts

Use this option to delete user accounts that are no longer needed.

1.

Select user account from Accounts list and press 

Delete

.

2.

Confirm deletion on confirmation dialog box.

Institution

Use this option to enter or update the institution name and address. This information is 
displayed on patient exam images. Optionally, enter a device description for the scanner. This 
may be useful if your site has multiple scanners.

NOTE: 

If your site was set up to connect to the scanner by name, and the device description 

field had a name defined, then SmartScan STUDIO Integration Services is using this name 
to maintain network connections. If you change the device description name here, then the 
new name needs to be selected on the SmartScan STUDIO Integration Services 
Configuration window. Access this window from Control Panel>SmartScan STUDIO 
Integration Services on the computer serving as the long term storage device and select the 
new name in the Scanner Connection field.

Enter information and press 

Save

.

Network

Use this option to enter or update the scanner network configuration and review network 
information.

NOTE: 

If you use 

Obtain automatically

 options, select this option for both the IP address 

and DNS server address.

Select 

Full network details

 to display information about Windows

®

 IP configuration, 

Ethernet adapter LAN connection, Ethernet adapter i-CAT (scanner) connection and Tunnel 
adapter.

Maintenance

Exam data is maintained on the scanner controller for a short period of time before it copied 
to remote storage (image server). Exam data that has been committed to remote storage is 
removed from the scanner controller automatically during routine maintenance, which runs 
automatically on a weekly basis. 

Summary of Contents for FLX V Series



























































































































Reviews:

No comments