![background image](http://html.mh-extra.com/html/hyundai/nextgen/nextgen_user-manual_2197313106.webp)
Network Camera User Manual
106
Figure 10-7 Video Tampering Alarm
2.
Check
Enable Video Tampering
checkbox to enable the video tampering detection.
3.
Set the video tampering area. Refer to
Task 1: Set the Motion Detection Area
in
Section 10.1.1.
4.
Click
Edit
to edit the arming schedule for video tampering. The arming schedule
configuration is the same as the setting of the arming schedule for motion detection.
Refer to
Task 2: Set the Arming Schedule for Motion Detection
in
Section 10.1.1.
5.
Check the checkbox to select the linkage method taken for the video tampering. Audible
warning, notify surveillance center, send email and trigger alarm output are selectable.
Please refer to
Task 3: Set the Linkage Method for Motion Detection
in
Section 10.1.1.