156
Network Camera User Manual
HDD Management
interface to unlock the memory card. Select the memory card,
and click the
Unlock
button shown next to the
Format
button. Then input the correct
password to unlock it.
Notes:
•
The memory card can only be read and written in when it is unlocked.
•
If the camera, which adds a lock to a memory card, is restored to the factory
settings, you can go to the HDD Management interface to unlock the memory
card.
Remove the Lock
(1)
Select the
Lock Switch
as
OFF
.
(2)
Input the correct password in
Password Settings
text field.
(3)
Click
Save
to save the settings.
4.
Set the
Arming Schedule
and
Linkage Method
, if you want to receive a notification
when the health status of the memory card is anything other than good. Refer to
Task 2:
Set the Arming Schedule for Motion Detection
and
Task 3: Set the Linkage Method for
Motion Detection
in
Section 10.1.1.
5.
Click
Save
to save the settings.
11.5
Configuring Lite Storage
Purpose:
When there is no moving object in the monitoring scenario, the frame rate and bitrate of the
video stream can be reduced to lengthen the storage time of the memory card.
Notes:
Lite storage function varies according to different camera models.
The video files recorded in lite storage mode will be played back in full frame rate
(25fps/30fps), and thus the playback process is speeded up to the eye.
1.
Enter the Lite Storage interface:
Configuration > Storage > Storage Management > Lite Storage
2.
Check the Checkbox of
Enable
to enable the lite storage function.
