Network Camera User Manual
122
Figure 10-22 Region Entrance Detection
2.
Check the
Enable
checkbox to enable the function.
3.
Select the
Region
from the drop-down list for detection settings.
4.
Click
Area Settings
and click
Draw Area
button to start the area drawing.
5.
Click on the live video to specify the four vertexes of the detection region, and right
click to complete drawing.
6.
Click-and-drag the slider to set the detection sensitivity.
Sensitivity:
Range [1-100]. The value of the sensitivity defines the size of the object
which can trigger the alarm. When the sensitivity is high, a very small object entering
the region can trigger the alarm.
7.
Repeat the above steps to configure other regions. Up to 4 regions can be set. You can
click the
Clear
button to clear all pre-defined regions.
8.
Click
Arming Schedule
to set the arming schedule.
9.
Click
Linkage Method
to select the linkage methods.