![background image](http://html.mh-extra.com/html/hyundai/nextgen/nextgen_user-manual_2197313020.webp)
19
Network Camera User Manual
2.
Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2 for
detailed IP address configuration of the network camera.
3.
Save the static IP in the router.
4.
Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary
according to the different routers. Please call the router manufacturer for assistance with
port mapping.
Note:
Refer to Appendix 2 for detailed information about port mapping.
5.
Visit the network camera through a web browser or the client software over the internet.
Figure 2-10 Accessing the Camera through Router with Static IP
Connecting the network camera with static IP directly
You can also save the static IP in the camera and directly connect it to the internet without
using a router. Refer to Section 2.1.2 for detailed IP address configuration of the network
camera.
Figure 2-11 Accessing the Camera with Static IP Directly
2.2.2
Dynamic IP Connection
Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect the
network camera to a modem or a router.
Connecting the network camera via a router
Steps: