![background image](http://html.mh-extra.com/html/hyundai/nextgen/nextgen_user-manual_2197313046.webp)
45
Network Camera User Manual
Note
:
If the camera is connected to a public network, you should use a NTP server that has
a time synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the camera is set in a customized network, NTP software can be used to
establish a NTP server for time synchronization.
Configure the manual time synchronization.
(1)
Check the
Manual Time Sync.
item to enable the manual time
synchronization function.
(2)
Click the icon
to select the date, time from the pop-up calendar.
(3)
(Optional) You can check
Sync. with computer time
item to synchronize the time
of the device with that of the local PC.
Figure 6-6 Time Sync Manually
Click
Save
to save the settings.
6.2.3
Configuring RS232 Settings
The RS232 port can be used in two ways:
Parameters Configuration: Connect a computer to the camera through the serial port.
Device parameters can be configured by using software such as HyperTerminal. The
serial port parameters must be the same as the serial port parameters of the camera.
Transparent Channel: Connect a serial device directly to the camera. The serial device
will be controlled remotely by the computer through the network.