51
Network Camera User Manual
Steps:
1.
Select firmware or firmware directory to locate the upgrade file.
Firmware: Locate the exact path of the upgrade file.
Firmware Directory: Only the directory the upgrade file belongs to is required.
2.
Click
Browse
to select the local upgrade file and then click
Upgrade
to start
remote upgrade.
Note:
The upgrading process will take 1 to 10 minutes. Please don't disconnect power
of the camera during the process, and the camera reboots automatically after upgrade.
6.3.2
Log
Purpose:
The operation, alarm, exception and information of the camera can be stored in log files.
You can also export the log files on your demand.
Before you start:
Please configure network storage for the camera or insert a SD card in the camera.
Steps:
1.
Enter log searching interface:
Configuration
>
System
>
Maintenance
>
Log
.
Figure 6-13 Log Searching Interface
2.
Set the log search conditions to specify the search, including the Major Type, Minor
Type, Start Time and End Time.
3.
Click
Search
to search log files. The matched log files will be displayed on the log list
interface.