![background image](http://html.mh-extra.com/html/hyundai/nextgen/nextgen_user-manual_2197313132.webp)
Network Camera User Manual
132
to left click on the live video to set the end points of the area and right click to
finish the area drawing.
Note:
If the live view is stopped, the detection area / line cannot be draw and the
rules cannot be set.
4.
Check the checkbox of the combined rule to enable the rule for behavior
analysis.
5.
Select two configured single rules as the Rule A and Rule B of the combined rule,
set the minimum and maximum time interval for the two single rules, and then
select the trigger order of the single rules for alarm filtering.
Notes:
If you select the rule type as None, the rule option is invalid, and no
behavior analysis can be configured.
Up to 8 single rules and 2 combined rules are configurable. And the line
crossing, intrusion, region exiting and region entrance are supported for the
combined rules.
6.
Click
Save
to save the settings.
7.
Click
Arming Schedule
tab to set the schedule time for each rule, and click
Save
to save the settings.
8.
Click
Linkage Method
tab, check the checkbox of corresponding linkage
method for each rule, and click
Save
to save the settings.
Advanced Configuration
Behavior Analysis Version: It lists the version of the algorithms library.
●
Parameter
Configure the following parameters to detail the configuration.